Guardian Series Low Profile and U-Lift
|
In addition to offering all the safety features of the
Guardian Series, the Low Profile and U-Lift models have a
lowered height of only 3 1/4".
The low profile feature provides greater flexibility since a
variety of applications can be accommodated. Also,
installation costs are reduced since the need for a floor
pit is eliminated.
With capacities ranging from 1,100 pounds to 3,300 pounds, the
"Guardian" Series low profile lift tables are available in
two versions with either a rectangular or "U" shaped top for
numerous material handling applications.
The "U" shaped low profile table is ideal for handling wire
baskets, containers and plastic and wooden pallets that have
open bottoms. This design allows loading with either a
manual or electric pallet truck without the need for a
loading ramp.
The Guardian Series Low Profile and U-Lift Tables meet and
exceed both the U.S. (ANSI) and European Safety Standards.
Standard Features:
|
|
- Upper platform fitted with safety perimeter which prevents
descent on contact with obstructions
- Upper limit switch
- External power unit equipped with a relief valve against
overloading and a compensated flow valve for controlling
lowering speed. Supplied with 8 ft. long hoses.
- 115 voltage single phase standard on 1,100 lb and 2,200 lb
capacity units. 230/460 volt 30 phase standard on 3,300 lb
units.
|
Low tension (24v) control box with up-down buttons
Single acting cylinders with drainage system and check
valve to stop the lift from lowering in case of hose burst.
Safety clearance between scissors to prevent trapping
during operations
Mechanical blocks for safe maintenance operations
Self-lubricating bushings on pivot points.
Removable lifting eye(s) to facilitate handling and
installation of the lift table
1 HP Motor
|
Level Lifter Ground Entry Lift Table
|
The Level-Lifter ground entry lift table is a unique product
for applications where a pit mounted lift table is required
but not practical. Thin side walls allow for easy access to
the product being handled. The Level-Lifter features an
exclusive 4-point lift system which is ideal for handling
unstable loads where deflection of the table top would be
undesirable.
Loads can be adjusted to individual comfort level through the
use of standard pushbutton or optional foot switch control.
Narrow sides allow easy access for loading and positioning.
Lowered height of 1/2" versus 7" or more for most conventional
lift tables brings the height of the top level to more
accessible work height.
|
|
Guardian Series Lift-N-Spin
|
With a lowered height of only 4-1/4", The Lift-N-Spin can be
loaded with a manual or electric pallet truck. This is
accomplished by the exclusive auto-transition plate.
The Lift-N-Spin has a raised height of 35". This is an ideal
height for work positioning applications. The rotating top
avoids the need to walk around or reach across.
Optional, The loading ramp comes in 3 standard sizes: 36",
42", or 48". Custom ramp sizes are available.
The "Guardian" Series meets and exceeds both U.S. (ANSI) and
European safety standards.
|
|
- Upper platform fitted with safety perimeter, which
prevents descent on contact with obstructions.
- Low-tension (24V) control box with up-down buttons.
In addition the "Guardian" Series includes an electric
circuit reset button in case the safety perimeter is
actuated.
- New design external power pack equipped with a
relief valve against overloading and a compensated flow
valve for controlling lowering speed. The power pack is
supplied with hoses 8' long.
- 115 voltage single phase standard . 230/460 voltage
three phase is available as an option.
- Upper limit switch.
|
- Single acting cylinders with drainage system and
check valve to stop the lift table lowering in case of
hose burst.
- Safety clearance between scissors to prevent
trapping during operations.
- Mechanical blocks for safe maintenance operations.
- Self-lubricating bushings on pivot points.
- Removable lifting eye(s) to facilitate handling and
installation of the lift table.
- Motor 1 HP.
|
|
SXTLP-25 Stainless Steel Ground Entry Lift Table
|
|
T304 Stainless steel construction
Passivated finish for in-place wash down
Platform size: 48" x 42"
Capacity: 2,500 lbs.
Self contained stainless steel enclosed power unit
110 volt AC TEFC Motor providing 1 HP output
Side Rail Height: 6"
Platform Raised Height: 37"
Platform Lowered Height:1/2" w/bevelled front edge
Elevation Time: @ 20 seconds
Base Size: 48 1/4" x 54 3/4"
Pedestal Lowered Height: 35 1/2"
Pedestal Raised Height: 55"
Descent Time: @ 8 seconds
Controls: Up / down foot petal
Actuation: Dual, low pressure hydraulic cylinders, SST
powder coated
|
Please contact
JRG Industries for pricing
information
Options:
Semi-Portable
230 single phase or 230/460 3 phase
|
|
