|
|
Ergonomic Lift & Turn Tables
Rotating Turntables Spin the Load for
Increased Handling Efficiency |
|
|
Roto-Max
|
Roto-Max was designed from the ground up with the operator in
mind. The Roto-Max electric hydraulic work positioner places
the load at the operator to determine where he or she would
like the work load positioned.
It doesn't matter how short or tall the individual is since
the operator determines the most comfortable working height.
The Roto-Max allows complete flexibility to do the
ergonomically safest job with maximum efficiency.
Whether the load is one pound or 3,500 pounds, the positioner
height does not change until the individual wants it to
change.
With a lowered height of only 6.5", an operator has easy
access to the top layer of product. The raised height of
32.5" (plus pallet height) is ideally suited for most
applications.
|
|
The 43" diameter top rotates easily, thus giving the operator
access to product without having to stretch or walk around.
|
- Cylinders with internal stops,
hard chrome plated, polished
shafting hydraulic cylinder
piston rods
- Surfaces degreased, descaled and finished with safety
yellow and blue enamel
- Internally mounted 1 1/2 hp motor
- 115 V Single phase
(20 amp circuit required)
|
Control box NEMA constant
pressure, magnetic backed
10 foot power cord
(Connector not included)
Smooth steel top with yellow and black safety strips
S.A.E. hoses and fittings
Integral gear pump with check valve, relief valve,
solenoid valve
Includes hydraulic oil and filter
|
Guardian Series Lift-N-Spin
|
With a lowered height of only 4-1/4", The Lift-N-Spin can be
loaded with a manual or electric pallet truck. This is
accomplished by the exclusive auto-transition plate.
The Lift-N-Spin has a raised height of 35". This is an ideal
height for work positioning applications. The rotating top
avoids the need to walk around or reach across.
Optional, The loading ramp comes in 3 standard sizes: 36",
42", or 48". Custom ramp sizes are available.
The "Guardian" Series meets and exceeds both U.S. (ANSI) and
European safety standards.
|
|
- Upper platform fitted with safety perimeter, which
prevents descent on contact with obstructions.
- Low-tension (24V) control box with up-down buttons.
In addition the "Guardian" Series includes an electric
circuit reset button in case the safety perimeter is
actuated.
- New design external power pack equipped with a
relief valve against overloading and a compensated flow
valve for controlling lowering speed. The power pack is
supplied with hoses 8' long.
- 115 voltage single phase standard . 230/460 voltage
three phase is available as an option.
- Upper limit switch.
|
- Single acting cylinders with drainage system and
check valve to stop the lift table lowering in case of
hose burst.
- Safety clearance between scissors to prevent
trapping during operations.
- Mechanical blocks for safe maintenance operations.
- Self-lubricating bushings on pivot points.
- Removable lifting eye(s) to facilitate handling and
installation of the lift table.
- Motor 1 HP.
|
|
Please
contact JRG Industries today
for assistance in choosing the best
ergonomic equipment solutions and ergonomic lift and
turn tables for your
applications.
Top |
|
|
|
|
